We want to confirm our strong commitment to our customers
during the ongoing coronavirus crisis.
While this remains a developing situation,
at this time Industrial Plastic Valves continues to operate on a normal basis.
We are here for you!
Contact us at 775-883-6108 or email us at sales@ipvalves.com Find out more
-
High-Flow Valves 1" - 3"
Available as 2-way normally closed or normally open. Valve flow rates from 5 to 300 gallons per minute. They can be plumbed in angle or globe configuration. They are constructed of chemical resistant plastic. Some models only available in brass or stainless steel.
-
Mid-Flow Valves 3/8" - 3/4"
Designed for a maximum recommended liquid flow rate of up to 30 gallons per minute. Available as two-way normally closed. Valves are available in plastic, brass, or stainless steel. Some models available in normally open configuration.
-
Low-Flow Valves 1/8" - 1/4"
Low-flow valves are recommended for flow rates of 0 to 1.8 gallons per minute. Available as two-way normally closed or normally open. Valves are available in plastic, brass, or stainless steel.
-
Specialty Valves
We are periodically asked to provide a valve for a customers specialized application. If you need a normally open valve, a valve that will operate with no water pressure, or a valve for chemical applications, we have them. Give us a call!
Our Company
-
Our Promise!
Industrial Plastic Valves Company provides an avenue for commercial manufactures looking for a low cost alternative for the flow regulation of air, water, gases and mild corrosives. IPV has been manufacturing and distributing high quality, low cost general purpose solenoid valves for more than 20 years to commercial and O.E.M. customers. We carry a complete line of plastic bodied solenoid operated control valves from sizes 1/8" to 3" as well as our 1/8" series valves in brass or stainless steel. We offer a wide range of solenoid voltages, body style and seal materials as well as solenoid wiring configurations. Please review our PRODUCTS page where you will find a detailed description of our low flow, mid flow and high flow valve series. For additional information, specifications or if you have a specialized application, please CONTACT us.
-
Great Engineering!
The Industrial Plastic Valves product line of thermoplastic, brass and stainless steel general purpose solenoid valves were developed for precise control of water, oils, and other media. The valves are available in a continuous duty type designed for industrial and OEM applications.
All IPV valves have been subjected to thorough development and testing to prove their suitability for industrial control requirements. All valves are subjected to careful visual and testing inspection prior to shipment.
-
Superb Materials!
NORYL GTX (PPE / PA) is a strong rigid plastic blend that provides low water absorption with a high heat resistance. It is an extremely chemically resistant material able to withstand automotive fuels, greases and oils. In addition, Noryl GTX resin is resistant to detergents, alcohols and alkaline chemicals. Its fluid temperature range is to +300 °F.
Buna-N (Nitrile Rubber) is superior to all other listed elastomers with regard to compression set, abrasion and tear resistance. It is recommended for general purpose sealing of water, silicone greases, petroleum oils and fluids. It offers a temperature range of 20 °F to +180 °F.