The 2400 valves are available as standard 2-way normally
closed. The 2400TF is the same valve as the 2400T, but offers
the option of flow control for reducing down stream flows. Both
are diaphragm type valves constructed of chemical resistant PVC
plastic. Designed to operate at pressures from 10-125 psi. with
an optimum flow range of 3 to 35 GPM. An internal manual bleed
is offered. The slow close feature prevents water
hammer. Available elastomers are standard Buna-n (Nitrile)
Materials
Seals
Nitrile (Buna-N)
Internal Components
Stainless Steel (300 and 400 series)
Shading Ring (AC units only)
Copper
Port Size
1" NPT
Operating Temperature
to 120°F (49°C)
Electrical
Voltages Available
AC 50/60 Hz 24, 120 or 240 volts DC 12, or 24 volts
Power Consumption
AC-5 watts, DC-6 watts
Coil Leads
18 AWG Stranded Copper PVC Insulation (UL type 3173)
