The 1" size 214B valve is available as standard 2-way
normally closed. The 214B offers a flow control handle for
reducing the down stream flow. The valve can be plumbed in an
angle or straight through globe configuration. The 214B is a
diaphragm type valve constructed of UV and chemical resistant
PVC plastic.
Designed to operate at pressures from 20 - 150 psi. with an
optimum flow range of 5 - 35 GPM. An internal manual bleed is
offered. The slow close feature prevents water hammer. Available
seat seal elastomer is standard Buna-N (Nitrile).
Materials
Seals
Nitrile (Buna-N)
Internal Components
Stainless Steel (300 and 400 series) PVC and elastomer type
Port Size
1" inch NPT female, inlet and outlet
Operating Temperature
to 120°F (49°C)
Electrical
Voltages Available
AC 50/60 Hz 24, 120 or 240 volts DC 12, or 24 volts
Power Consumption
AC-5 watts, DC-6 watts
Coil Leads
18 AWG Stranded Copper PVC Insulation (UL type 3173)
